Publication Opportunity

IMPORTANT NOTES:

  • Several Publication windows are introduced in this Call including Conference Proceedings and indexed journals. Make sure to Select ONLY ONE of the Publication opportunities. Simultaneous submissions can potentially lead to copyright violations or disputes if the work is published in different publications.
  • Check the scope of each publication opportunity and select the ONE that best matches the theme of your paper.
  • Strictly follow the submission guide for each publication opportunity.

Deadline: 12 January 2023

Conference Proceedings

Conference Proceedings will be published with ISBN Number. All full papers submitted for conference proceedings will be accepted through a double-blind review process and will be published electronically in proceedings with a DOI number.

To submit your paper for proceedings publication, prepare your paper according to the template and submit your final full paper.

Full Paper Template

  • Accepted file types: doc, docx, Max. file size: 32 MB.
    Allowed file extensions: doc, docx

Peer-Reviewed Journal Publication

Important NOTES before Journal Submission:

  1. Carefully read the Scope of the selected journal before submission, otherwise your paper will be rejected without a review process.
  2. The decision of whether or not the submission can be included in the journal publication remains at the full discretion of the journal editors and is subject to the results of the double-blind peer review and the satisfactory completion of any revisions required.
  3. If your full paper has been published in the conference proceeding you are highly recommended to modify your paper and also inform the Journal Editor about the publication of a preliminary version of the work in the conference proceeding.
  4. If you select a journal with a Direct Submission Link, include a note to the Editorial Board with information about the conference and the Organizer.

Civil Engineering and Architecture is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of civil engineering and architecture. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference.

Manuscripts submitted to our journals must be written in English. Papers accepted for publication vary from 5 to 20 pages in two-column format (at least 3000 words but no more than 10000 words, inclusive of references). The main text usually can be divided into separated sections, organized by Introduction, Materials and Methods, Results, Discussion, Conclusion, Acknowledgement, Conflict of Interest, Appendix and Reference.
Paper Title A title of no more than 20 words should be brief, specific, and informative.
Author Details Full name for all authors should be given; The names of multiple authors are separated by a comma; Provide the full affiliation for each author including academic affiliation (or postal address), city, postcode, country, e-mail(optional); If multiple authors have contributed to the article, details of the corresponding author should be clear. Email address is compulsory for the corresponding author.
Abstract The abstract should be written as a continuous paragraph with 200-350 words and recapitulatively state the background of the research, purpose, methodologies, principal results, major conclusions and its contributions to the field. It should emphasize new or important aspects of the study. Research limitations/implications, practical implications, and social implications should also be included, if relevant to your manuscripts.
Keywords 3-10 keywords which can accurately reflect the theme of the article should be included for indexing.
Introduction Provide a brief overview of the scope and relevance of the research, especially with regard to previous advancements in related fields
Materials and Methods Present the research design, research type, research duration, inclusion/exclusion criteria, choice of subjects, etc. Describe the methodology completely, including sample collection, processing, lab analysis, statistical tests used for data analysis etc. Use section headings/subheadings in a logical order to entitle each category or method . (e.g. 1, 2; 1.1, 2.1; 1.1.1, 2.1.1…etc)
Results Present and illustrate your findings objectively and concisely, if appropriate, with figures/ tables. In the main text, describe each of your results by a particular observation.
Discussion Provide an interpretation of your results and make comparisons with other studies. The significance of findings should be clearly described. If your results differ from your expectations, explain why that may have happened. If your results agree, then describe the theory that the evidence supported.
Conclusion The main conclusions of the experimental work should be presented. The contribution of the work to the scientific research and its economic implications should be emphasized.
Appendix An appendix may be included (and is often helpful) in mathematical or computational modeling.
Acknowledgements The acknowledgements section is where you may wish to thank people indirectly involved with the research (e.g., technical support; loans of experimental facilities; comments or suggestions during the creation of the manuscript). However, it is important that anyone listed here knows in advance of your acknowledgement of their contributions. Do not include dedications.

Manuscript Template

Accepted file types: doc, docx, Max. file size: 32 MB.
Allowed file extensions: doc, docx
Please select:(Required)

European Journal of Engineering Science and Technology is an international journal of research in Engineering Science and Technology aims to provide a common platform to disseminate the original research work. EJEST is a peer-reviewed journal with a key objective to provide the academic and industrial group of people a medium for presenting original research and applications related to Engineering Science, Technology and Application. It is a completely online journal. The mission of this journal is to publish original contributions in its field in order to spread knowledge amongst its readers and to be a reference publication.

  • ISSN: 2538-9181
  • Journal Link: https://www.diamondopen.com/ejest/
  • Publication fee: No APC
  • Indexing/Abstracting: Index Copernicus, DRJI, ResearchBib, Scientific Indexing Services, Scientific Indexing Services, Scilit, CiteFactor, WCOSJ, and Google Scholar. EJEST has linked its papers to references by DOIs assigned by Crossref.

Manuscripts should be organized as follows:

  • Title page: List title, authors, and affiliations as first page of manuscript
  • Abstract: an abstract should summarize the key points of the manuscript in 150 to 250 words. An abstract is a short summary of a larger work for the purpose of condensing the argument, conclusions, and/or results into a paragraph. After the abstract, please supply up to five keywords or brief phrases.
  • Manuscript should follow the style detailed in the APA publication manual.
  • Introduction
  • Materials and Methods
  • Results
  • Discussion
  • Conclusions (optional)
  • Acknowledgments (if applicable)
  • References: This journal uses “APA” Reference style. Each listed reference should be cited in text, and each text citation should be listed in the references section.
  • Supporting information captions (if applicable)
  • Figure captions are inserted immediately after the first paragraph in which the figure is cited.
  • Tables are inserted immediately after the first paragraph in which they are cited.

Register in the following link and submit your paper on the Journal online Submission platform:

https://www.dpublication.com/journal/EJEST/user/register

The aim of Curved and Layered Structures is to become a premier source of knowledge and a worldwide-recognized platform of research and knowledge exchange for scientists of different disciplinary origins and backgrounds (e.g., civil, mechanical, marine, aerospace engineers and architects). The journal publishes research papers from a broad range of topics and approaches including structural mechanics, computational mechanics, engineering structures, architectural design, wind engineering, aerospace engineering, naval engineering, structural stability, structural dynamics, structural stability/reliability, experimental modeling and smart structures. Therefore, the Journal accepts both theoretical and applied contributions in all subfields of structural mechanics as long as they contribute in a broad sense to the core theme.

  • Include a note to the Editorial Board with information about the conference and the organizer.
  • For complete instructions, please carefully following guidelines described in “Instructions for Authors” file.

CLS – Instructions for Authors

Manuscripts should be submitted to the journal via ethe Online Submission platform:

https://www.editorialmanager.com/clstructures/default1.aspx

Mathematics and Statistics is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of mathematics and statistics. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference. 

  • The journal welcomes submission of full-length research articles, review articles, and critical analysis articles.
  • Manuscripts submitted to this journal must be written in English.
  • Papers accepted for publication vary from 5 to 20 pages in two-column format.
  • The main text usually can be divided into separated sections, organized by Introduction, Materials and Methods, Results, Discussion, Conclusion.
  • Full name for all authors should be given; The names of multiple authors are separated by a comma; Provide the full affiliation for each author including academic affiliation (or postal address), city, postcode, country, Email(optional); If multiple authors have contributed to the article, details of the corresponding author should be clear. Email address is compulsory for the corresponding author.
  • The abstract should be written as a continuous paragraph with 200-250 words and recapitulatively state the background of the research, purpose, methodologies, principal results, major conclusions and its contributions to the field. It should emphasize new or important aspects of the study.
  • Include 3–8 keywords or short phrases for indexing.
  • Every table must have a unique title placed at the top. Titles should be clear and concise, and they should not be complete sentences.
  • Tables in the main body of the text should be numbered and cited consecutively according to their appearance in the text.
  • Each figure should have a caption. The caption should be concise and typed separately, not on the figure area; If figures have parts (for example, A and B), make sure all parts are explained in the caption.
  • All figures are to be sequentially numbered with Arabic numerals. Figures should always be cited in text in consecutive numerical order.
  • The equation number should be placed in parentheses to the right of the equation. E.g. Hn+1(1/n+1, 1/n+1, …, 1/n+1) (1); Do not create equations as pictures. Use MathType or insert symbols as normal text.
  • All sources cited in text must appear in the reference list and all items in the reference list must be cited in text.
  • All references should be listed numerically in the order they’ve been cited within the paper. At the beginning of each reference, the bracketed number should be included.

Finally, please ensure read and adhere to the Author Guidelines.

Manuscript Template

Accepted file types: doc, docx, Max. file size: 32 MB.
Allowed file extensions: doc, docx
Please select:(Required)

Open Journal of Energy Efficiency (OJEE) is an open access journal published quarterly. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in all areas of energy efficiency. All manuscripts must be prepared in English and are subject to a rigorous peer-review process. Generally, accepted papers will appear online within 3 weeks followed by printed hard copy.

  • ISSN Print: 2169-2637
  • ISSN Online: 2169-2645
  • Journal Link: www.scirp.org/journal/ojee
  • Indexing/Abstracting: Google Scholar, Base Search, CALIS, ChaoXing Periodicals, CiteFactor, Cnplinker, COPAC, CQVIP, CrossRef, DTU Findit, Elektronische Zeitschriftenbibliothek(EZB), ERA 2018 Journal List, Harvard Library E-Journals, Infotrieve, i-Scholar, JournalSeek, JournalTOCs, National Center for Philosophy and Social Sciences Documentation, National Science and Technology Library(NSTL), Open Access Library
  • Open J-Gate, Research Bible, ResearchGate, SciLit and many more.
  • Publication fee: 342 EUR

Article type: One Column

Manuscript organization: All manuscripts are expected to be prepared as a single PDF or MS Word document with the complete text, references, tables and figures included. Any revised manuscripts prepared for publication should be sent as a single editable Word document. LaTex paper is also acceptable for publication, but it should be in PDF for review first.
Manuscripts should be written in English. Title, author(s), and affiliations should all be included on a title page as the first page of the manuscript file, followed by a 100-300 word abstract and 3-5 keywords. The order they follow is: Title, Authors, Affiliations, Abstract, Keywords, Introduction.

Figure and table requirement: All figures or photographs must be submitted as jpg or tif files with distinct characters and symbols at 500 dpi (dots per inch). Test your figures by printing them from a personal computer. The online version should look relatively similar to the personal-printer copy. Tables and equations should be in an editable rather than image version. Tables must be edited with Word/Excel. Equations must be edited with Equation Editor. Figures, tables and equations should be numbered and cited as Figure 1, Figure 2, Figure 3, etc. in sequence.

How to count page numbers: Before submission or after acceptance, type your manuscript single spaced, and make all the characters in the text, tables, figure legends, footnotes and references in a single typeface and point size as 10 pt Times New Roman. This will save space, make it easier for reviewers and editors to process the submitted work, and contributes to slowing down global warming by using less paper.

References format: All references should be numbered in square brackets in the text and listed in the REFERENCES section in the order they appear in the text. Below are some examples:

Journal Articles:
[1] García, J.I., Sepúlveda, S. and Noriega-Hoces, L. (2010) Beneficial Effect of Reduced Oxygen Concentration with Transfer of Blastocysts in IVF Patients Older than 40 Years Old. Health, 2, 1010-1017.

[2] Maganioti, A.E., Chrissanthi, H.D., Charalabos, P.C., Andreas, R.D., George, P.N. and Christos, C.N. (2010) Cointegration of Event-Related Potential (ERP) Signals in Experiments with Different Electromagnetic Field (EMF) Conditions. Health, 2, 400-406.

[3] Bootorabi, F., Haapasalo, J., Smith, E., Haapasalo, H. and Parkkila, S. (2011) Carbonic Anhydrase VII—A Potential Prognostic Marker in Gliomas. Health, 3, 6-12.

E-Journal Articles:
[4] Bharti, V.K. and Srivastava, R.S. (2009) Protective Role of Buffalo Pineal Proteins on Arsenic-Induced Oxidative Stress in Blood and Kidney of Rats. Health, 1, 167-172.
http://www.scirp.org/fileOperation/downLoad.aspx?path=Health20090100017_97188589.pdf&type=journal

Books:
[5] Verdu, S. (1998) Multi-User Detection. Cambridge University Press, Cambridge.

Edited Book:
[6] Prasad, A.S. (1982) Clinical and Biochemical Spectrum of Zinc Deficiency in Human Subjects. In: Prasad, A.S., Ed., Clinical, Biochemical and Nutritional Aspects of Trace Elements, Alan R. Liss, Inc., New York, 5-15.

Conference Proceedings:
[7] Clare, L., Pottie, G. and Agre, J. (1999) Self-Organizing Distributed Sensor Networks. Proceedings SPIE Conference Unattended Ground Sensor Technologies and Applications, Orlando, 3713, 229-237.

Thesis:
[8] Heinzelman, W. (2000) Application-Specific Protocol Architectures for Wireless Networks. Ph.D. Dissertation, Massachusetts Institute of Technology, Cambridge.

Internet:
[9] Honeycutt, L. (1998) Communication and Design Course.
http://dcr.rpi.edu/commdesign/class1.html

 

Manuscript Template

  • Accepted file types: doc, docx, Max. file size: 32 MB.
    Allowed file extensions: doc, docx
  • 0,00 €

International Journal of Human Movement and Sports Sciences is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of Human Movement and Sports Sciences. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference.

Types of Articles
The journal welcomes submission of full-length research articles, review articles, and critical analysis articles.
General
Manuscripts submitted to our journals must be written in English. Papers accepted for publication vary from 5 to 20 pages in two-column format (at least 3000 words but no more than 10000 words, inclusive of references). The main text usually can be divided into separated sections, organized by Introduction, Materials and Methods, Results, Discussion, Conclusion, Acknowledgement, Conflict of Interest, Appendix and Reference.
Paper Title
A title of no more than 20 words should be brief, specific, and informative.
Author Details
Full name for all authors should be given; The names of multiple authors are separated by a comma; Provide the full affiliation for each author including academic affiliation (or postal address), city, postcode, country, e-mail(optional); If multiple authors have contributed to the article, details of the corresponding author should be clear. Email address is compulsory for the corresponding author.
Abstract
The abstract should be written as a continuous paragraph with 200-350 words and recapitulatively state the background of the research, purpose, methodologies, principal results, major conclusions and its contributions to the field. It should emphasize new or important aspects of the study. Research limitations/implications, practical implications, and social implications should also be included, if relevant to your manuscripts.
Keywords
3-10 keywords which can accurately reflect the theme of the article should be included for indexing.
Introduction
Provide a brief overview of the scope and relevance of the research, especially with regard to previous advancements in related fields
Materials and Methods
Present the research design, research type, research duration, inclusion/exclusion criteria, choice of subjects, etc. Describe the methodology completely, including sample collection, processing, lab analysis, statistical tests used for data analysis etc. Use section headings/subheadings in a logical order to entitle each category or method . (e.g. 1, 2; 1.1, 2.1; 1.1.1, 2.1.1…etc)
Results
Present and illustrate your findings objectively and concisely, if appropriate, with figures/ tables. In the main text, describe each of your results by a particular observation.
Discussion
Provide an interpretation of your results and make comparisons with other studies. The significance of findings should be clearly described. If your results differ from your expectations, explain why that may have happened. If your results agree, then describe the theory that the evidence supported.
Conclusion
The main conclusions of the experimental work should be presented. The contribution of the work to the scientific research and its economic implications should be emphasized.
Appendix
An appendix may be included (and is often helpful) in mathematical or computational modeling.
Acknowledgements
The acknowledgements section is where you may wish to thank people indirectly involved with the research (e.g., technical support; loans of experimental facilities; comments or suggestions during the creation of the manuscript). However, it is important that anyone listed here knows in advance of your acknowledgement of their contributions. Do not include dedications.
TABLE Title
Every table must have a unique title placed at the top. Titles should be clear and concise, and they should not be complete sentences.
TABLE Format
Table tools in Microsoft Word are strongly recommended for inserting a table. It’s necessary to avoid tables created with the tab key.
TABLE Numbering & Citation
Tables in the main body of the text should be numbered and cited consecutively according to their appearance in the text.
FIGURE Caption
Each figure should have a caption. The caption should be concise and typed separately, not on the figure area; If figures have parts (for example, A and B), make sure all parts are explained in the caption.
FIGURE Numbering & Citation
All figures are to be sequentially numbered with Arabic numerals. Figures should always be cited in text in consecutive numerical order.
FIGURE Resolution
Figures must be created at a minimum resolution of 300 dpi. For fuzzy or jagged figures, authors are required to replace it or send the original figure file to us for reproduction.
EQUATION Format
The equation number should be placed in parentheses to the right of the equation. E.g. Hn+1(1/n+1, 1/n+1, …, 1/n+1) (1); Do not create equations as pictures. Use MathType or insert symbols as normal text.
EQUATION Numbering & Citation
Equations should be numbered consecutively with Arabic numerals to avoid ambiguities, if they will be referred to in text. Citation for an equation should be made by using “(1),” not “Eq. (1)” or “equation (1),” except at the beginning of a sentence: “Equation (1) is…”
REFERENCES Summary
(1). All sources cited in text must appear in the reference list and all items in the reference list must be cited in text.
(2). All references should be listed numerically in the order they’ve been cited within the paper. At the beginning of each reference, the bracketed number should be included.

REFERENCES In-Text Citation Format
References are simply cited with the consistent reference number in square brackets. Do not set references number as superscript number. Do not use “Ref. [3]” or “Reference [3]” except at the beginning of a sentence, e.g. “Reference [3] shows …”
A. Single Reference
If the author’s name appears in the text, place the reference number immediately after the name. E.g. Peter[10] found an innovative scientific phenomenon.
B. Multiple References
(1). Put two numbers in numerical order and separate them by commas but no spaces. E.g.: [2,3] or [2], [3]
(2). Indicate three or more consecutive reference numbers by using the following format. E.g.: [1], [3], [5]; [1] – [5] or [1, 3, 5]; [1-5]

List of REFERENCES
Authors are requested to check all references for completeness, including author names, paper title, journal heading, Volume, Number., pages for journal citations, Year, DOI (or URL if possible). (Please note that the DOI should be placed after the URL and end with a period.)
Journals
All author names, “Title,” Journal title, vol., no., pp. xxx–xxx., Year, DOI (or URL)
e.g.
[1] Clarke A., Mike F., S. Mary, “The Use of Technology in Education,” Universal Journal of Educational Research, vol. 1, no. 1, pp. 1–10, 2015. DOI: 10.13189/ujer.2015.010829
Books
All author names, “Title of chapter in the book,” in Title of the Published Book, (xth ed. if possible), Abbrev. of Publisher, Year, pp. xxx–xxx.
e.g.
[1] Tom B, Jack E, R. Voss, “The Current Situation of Education,” in Current Situation and Development of Contemporary Education, 1st ed, HRPUB, 2013, pp. 1-200.
Conference Papers
All author names, “Title,” Conference title, (location of conference is optional), (Month and day(s) if provided) Year, pp., (DOI or URL, if possible)
e.g.
[1] David H., Tim P., “The Use of Technology in Teaching,” The Third International Conference, LA, USA, Jul., 2013, pp. 19-23. (The year may be omitted if it has been given in the conference title) (DOI or URL, if possible).
Websites
All author names, “Page Title.” Website Title. Web Address (retrieved Date Accessed).
e.g.
[1] Partson K., Joe L., “The Use of Technology in Teaching”, US News, http://www.hrpub.com (accessed Jan. 1, 2013).

Manuscript Template

Accepted file types: doc, docx, Max. file size: 32 MB.
Allowed file extensions: doc, docx
Please select:(Required)

The objective of the journal is to publish and discuss fundamentals, applications and experiences in the fields of Online Engineering (remote engineering, virtual instrumentation and online simulations, etc) and Biomedical Engineering/e-Health.

As part of the submission process, authors are required to check off their submission’s compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

 

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submitting author hereby warrants that the submission is original and that she/he is the author of the submission together with the named co-authors; to the extend the submission incorporates text passages, figures, data or other material from the work of others, the submitting author has obtained any necessary permission.
  3. We expect at least 3 references to journals from OnlineJournals.ORG (http://online-journals.org/ ) if possible. Furthermore, without good reasons, your submission should not have more than 3 self-citations.
  4. Full papers should be 12-16 pages.
  5. The citation style must completely follow the paper template.
  6. The submission file is in Microsoft Word or RTF document file format. Below find the Template and a guide for writing an academic paper.
  7. All URL addresses in the text (e.g., http://pkp.sfu.ca) are activated and ready to click.
  8. The text is written in English and meets this journal’s formatting requirements outlined in the Author Guidelines.

 

Blue Prints for a Journal Article

Template and Author Guide

Accepted file types: doc, docx, Max. file size: 32 MB.
Allowed file extensions: doc, docx
Please select:(Required)